How to Build an Indoor Putting Green in San Antonio
To build an indoor putting green, choose a room with enough flat floor space, decide whether to lay the green directly on the floor or on a raised platform, prepare a firm, level subfloor, then install dedicated putting turf with the grain running one way and add cups. A raised platform takes more work but lets you sink real cups and build in breaks. Laying turf straight on a concrete slab is faster and works well for a simple practice strip.
At Amazing Turf & Lawn, we install putting greens across San Antonio, from backyards to game rooms, offices, and garages. This guide walks through planning the space, choosing a build method, picking turf and green speed, and the step-by-step build, plus what to know about San Antonio homes.
Plan Your Indoor Putting Green Space
Start with the room and the size, because they decide almost everything else about the build.
Which room works best?
- Garage: The most popular choice in San Antonio. Concrete floors are flat and strong, and there is usually room for a longer green. Plan for summer heat if the garage is not air-conditioned.
- Game room or media room: Climate-controlled and comfortable year-round, often carpeted or tiled. A raised platform is the usual approach here so the existing floor stays protected.
- Home office or spare bedroom: Good for a compact practice strip with one or two cups.
- Commercial spaces: Offices, showrooms, and event venues can use a modular platform green that can be removed later.
How much space do you need?
A practice strip can be as small as about 3 by 10 feet, which is enough for straight putts and speed control. For multiple cups and a few breaks, plan on 8 by 12 feet or more. Leave at least a couple of feet of walkway around the green, so you have room to stand and swing your putter without hitting walls or furniture.
If you also want to chip onto the green or add a golf simulator, check ceiling height and allow a dedicated hitting area with its own mat.
Choose Your Build Method
There are two main ways to build an indoor green: directly on the floor, or on a raised platform. The right choice depends on your floor and how realistic you want the green to play.
| Direct on slab or floor | Raised platform | |
| Best for | Simple practice strips, garages with flat concrete | Full greens with sunken cups and breaks |
| Cups | Surface cups or a target ring (no hole in the slab) | Real cups cut through the deck |
| Breaks and slope | Limited to the floor’s natural slope | Built in with shims or shaped foam |
| Build time | Faster | Takes longer, more materials |
| Removable | Easy to roll up if not glued | Can be built in modules for removal |
Can you put a putting green directly on concrete?
Yes. Many San Antonio homes sit on concrete slabs, and a clean, flat slab makes a firm base for putting turf. Sweep and clean it, fill cracks, and check that it is flat across the putting area. Lay the turf loose with carpet tape at the edges for a removable green, or glue it down for a permanent one. The trade-off is that you cannot cut cups into the slab so you will use surface cups or targets.
What Goes Under an Indoor Putting Green?
An indoor putting green needs a firm, smooth, level surface underneath, because any soft spot or dip changes how the ball rolls. On a raised platform, that usually means a 2×4 lumber frame with a plywood or OSB deck screwed on top. Some builders add rigid foam board under the deck to raise the height or shape contours.
Avoid soft padding directly under putting turf. Golfers who have tried carpet pad or soft foam tiles under their greens often report the surface feels squishy and the ball bounces or rolls inconsistently. If you want a little cushion for standing, keep it thin and dense, or put it only under the stance and hitting areas.
Choose the Right Putting Green Turf
Use dedicated putting green turf, not landscape grass. Putting turf has a short, dense pile that lets the ball roll smoothly and predictably. Landscape turf is too tall and soft, so the ball slows down and wobbles.
At Amazing Turf & Lawn, we can adjust putting turf pile height and weight to fine-tune ball roll and speed, and we carry bentgrass-style putting surfaces that look and play like a real green. See our putting greens page for the options we install.
Putting turf has a grain, a slight lean in the fibers that runs along the length of the roll. If your green needs more than one piece, lay every piece with the grain running in the same direction so the ball rolls the same way across the seam.
How fast should a home putting green be?
Green speed is how far a ball rolls with a standard push, measured with a tool called a Stimpmeter. The USGA describes green speed as the average distance a ball travels after rolling off the Stimpmeter onto the green, and stresses that consistent speed across a green matters as much as the speed itself. Most American courses fall roughly between 7 and 12 on the Stimpmeter, according to the USGA.
For a home green, match the speed to your style of play. A medium speed suits most golfers and families, while a faster surface helps if you play quick tournament greens. Tell your installer the speed you want, since it depends on the turf, the infill, and the subfloor.
How do you add breaks and slope?
On a raised platform, you can build gentle breaks by placing shims or tapered foam under sections of the deck before the plywood goes on, then checking the roll with a ball and level as you go. Keep breaks subtle. Indoors, a small rise goes a long way, and steep contours make short putts frustrating.
How do you install cups indoors?
On a platform, mark each cup location, cut through the turf and deck with a hole saw, and drop in a cup liner. A regulation golf hole is 4.25 inches in diameter. Place cups at different distances and break angles so you practice a variety of putts. Leave enough deck depth below the hole for the cup and a ball.
Step-by-Step: How to Build an Indoor Putting Green
These steps cover a raised-platform green, the most flexible indoor build. For a direct-on-slab green, skip steps 3 to 5.
- Measure and sketch the space. Draw the green to scale, mark cup locations, and note doors, outlets, and walkways.
- Prepare the floor. Clean the slab or floor, fill cracks, and check for moisture in the concrete before building over it.
- Build the frame. Lay out a perimeter frame of 2×4 lumber with inner joists spaced close enough to support your weight without flex.
- Shape the breaks. Add shims or tapered foam where you want slope, then check each area with a level and a rolling ball.
- Install the deck. Screw plywood or OSB sheets to the frame, keeping seams tight and screw heads flush so they do not show through the turf.
- Lay the turf. Roll out putting turf with the grain running in one direction, let it relax flat, then trim to fit and secure it with adhesive or carpet tape.
- Seam any joins. Butt pieces tightly, join them with seam tape and adhesive, and keep the grain matched across the seam.
- Cut the cups. Use a hole saw to cut 4.25-inch holes through the turf and deck, then set the cup liners.
- Finish the edges. Wrap the turf over the platform edge or add a fringe of slightly taller turf for a finished look.
- Test and tune. Roll balls from several spots, watch how they break, and adjust infill or add shims where the roll is inconsistent.
San Antonio Tips for Indoor Putting Greens
A few local conditions are worth planning around.
- Concrete slabs. Many San Antonio homes are built on slabs. Test for moisture before gluing turf or building a platform on a garage or ground-floor slab, and use a moisture barrier if needed.
- Garage heat. Unconditioned garages get very hot in South Texas summers. Install turf and adhesives within the temperature range the manufacturer lists, and consider a fan, mini-split, or portable AC if you plan to practice in summer.
- Pets and kids. Turf is durable, but a dog that digs or chews will damage edges and cups. Plan the green so pets don’t spend unsupervised time on it.
- Resale. You can remove a modular platform green if you sell, while a glued green on a slab is more permanent.
Should You Build It Yourself or Hire an Installer?
Putting a simple strip on a flat slab is a reasonable DIY project. A full green with sunken cups, built-in breaks, a consistent speed, and invisible seams is where a professional installer makes the biggest difference, because small errors in the deck or turf show up in every putt.
If you are weighing the two, our guide to artificial grass rolls vs. professional installation explains the trade-offs in cost, time, and results.
You can also see putting greens and turf projects we have built in our project gallery. Most professional putting green installations take about two to five days, depending on the size and design.
When you are ready to price a project, our guide on how to get an artificial grass installation estimate explains what to measure and what a good quote should include.
FAQ
How much space do I need for an indoor putting green?
A basic practice strip needs about 3 by 10 feet. For several cups and some breaks, plan on 8 by 12 feet or more, plus walking space around the edges.
Can I install a putting green on my garage floor?
Yes. A clean, flat concrete garage floor is a firm base for putting turf. Test the slab for moisture first, and use surface cups or build a raised platform if you want sunken cups.
What is the best subfloor for an indoor putting green?
A firm plywood or OSB deck on a 2×4 frame is the most common choice for a raised green. Avoid soft carpet pad or squishy foam directly under the turf, which can make the ball bounce.
Can I use regular artificial grass for an indoor putting green?
No. Landscape turf is too tall and soft for consistent ball roll. Use dedicated putting turf with a short, dense pile.
How big is a putting green cup?
A regulation golf hole is 4.25 inches in diameter. Use a matching hole saw and cup liner on a raised platform.
How long does it take to install an indoor putting green?
A professional putting green installation from Amazing Turf & Lawn typically takes two to five days, depending on size, site preparation, and design.
How do I clean an indoor putting green?
Vacuum or use a leaf blower on a low setting to remove dust and debris, wipe up spills promptly, and brush the turf lightly if fibers start to flatten.
Get an Indoor Putting Green Installed in San Antonio
An indoor putting green comes down to three things: a firm, level base, the right putting turf laid with the grain in one direction, and cups and breaks placed with care. Whether you want a simple garage strip or a full game-room green, Amazing Turf & Lawn can design and install it. Request a free quote, call us at 210-899-0516, or visit us at 6227 Krempen Ave, San Antonio, TX 78233.